RFT Painting Family Owned, Family Run

Concrete Painting

Concrete walls, patios and block work, cleaned and sealed first

Yes, RFT Painting paints concrete surfaces in Albany Creek and Brisbane's northern suburbs, including walls, retaining walls, patios, paths and block work. Concrete is porous and often dirty or stained, so it must be cleaned, repaired and sealed before painting. We use coatings designed for masonry rather than ordinary wall paint.

Surfaces
Walls, patios, paths, block work
Prep
Clean, repair, seal
Coating
Masonry or floor coatings
Quote
Free and written

Request a written estimate

Free, after an on-site visit

Or ring

0431 773 204

Why does concrete need special preparation?

Concrete is porous, and its surface may carry dust, mould, efflorescence (a white salty powder), oil and old paint. Paint will not bond to any of that. We wash the surface, remove anything loose or contaminated, repair cracks and holes, and apply a sealer or primer so the topcoat sticks and does not soak straight in.

Can I paint a concrete driveway or path?

Yes, using a coating made for floors. Surfaces that cars drive over are harder on paint than a patio, and a driveway will wear and mark in the tracks. Coatings can also be slippery when wet, so we discuss an anti-slip finish where it matters.

What about damp or leaking concrete?

Moisture is the main enemy of paint on concrete. If water is seeping through a retaining wall or a slab, the paint will blister and peel whatever product is used. The leak needs fixing before painting, and we will say so if we see signs of it.

Questions about concrete painting

All questions
Does painted concrete need repainting?

Yes, eventually. High-traffic and sun-exposed areas wear first. Good preparation extends the time between repaints.

Can you paint over old paint on concrete?

If it is sound and well bonded, yes. Flaking paint has to be removed first.